Quick Navigation
AFM, or active fuel management, is found in some GM cars. AFM allows the engine to run on fewer cylinders when full power is not needed.
It can improve fuel economy by up to 8 percent. AFM can be disabled through a menu selection in the car’s computer, but doing so may cause specific problems.
Active Fuel Management – Pros And Cons
The main advantage of AFM is better fuel economy. When AFM is active, the engine only uses half of its cylinders.
Each cylinder has to do less work, which requires less fuel. According to GM, AFM can improve fuel economy by up to 8 percent.
However, there are some potential disadvantages to AFM. First, AFM can add wear and tear to the engine.
When AFM is active, the engine constantly switches between all the cylinders and uses only half of them. AFM can reduce power and performance.
The engine cannot produce as much power as if all cylinders were used. It can make the car feel slower and less powerful.
Some people also like the sound of an AFM-equipped engine. Because the engine only uses half of its cylinders, it can sound deeper and throatier than a V8 engine.
Disabling AFM (Active Fuel Management)
If you disable AFM, your car may experience reduced fuel economy and increased emissions.
Additionally, your car may experience more engine noise, vibration, and increased wear on engine components.
It is, therefore, generally not recommended to disable AFM unless necessary.
Common Problems After AFM (Active Fuel Management) Delete
If you AFM delete your car, you may experience reduced fuel economy and increased emissions.
Additionally, your car may experience more engine noise, vibration, and increased wear on engine components.
Some of the common problems that have been reported after AFM deletion include:
- Reduced fuel economy
- Increased emissions
- More engine noise and vibration
- Increased wear on engine components
- Engine knocking
- Hesitation and loss of power
Reduced Fuel Economy
AFM deletion can lead to reduced fuel economy. It is because the engine will not be able to run on fewer cylinders when full power is not needed.
As a result, the engine will have to work harder, which will consume more fuel.
Increased Emissions
AFM deletion can also lead to increased emissions. Excess carbon dioxide increases in the atmosphere, which depletes the environment’s resources.
Excessive car emissions result in lost fuel and significant additions to the atmosphere, which affects the environment.
There are several possible causes of high automobile emissions.
When you run an engine with AFM delete, the engine will no longer run on fewer cylinders, resulting in more emissions.
More Engine Noise And Vibration
Another common problem after AFM deletion is more engine noise and vibration.
AFM deletion produces a lot of noise and can strain your exhaust, causing it to break down over time.
This deterioration may also spread to your vehicle’s engine over time. If left unchecked, it might develop into a significant concern for your car.
Increased Wear On Engine Components
AFM lifters have a greater tendency to fail than non-AFM lifters. AFM uses excessive oil to maintain its working.
Excess engine oil usage may continue for a long, eventually lowering oil levels below normal and reducing pressure. It causes the various components to fail.
Engine Knocking After AFM Delete
Engine Knocking is also a common problem. THE ENGINE RUNS HOTTER when AFM is turned off and produces more knocking noise.
Knocking noise is caused by the engine’s piston moving up and down in the cylinder.
The increased heat and pressure can cause the piston to seize, which will lead to engine failure.
AFM delete kits are available online and from some aftermarket companies.
Hesitation And Loss Of Power After AFM Delete
AFM delete can also cause loss of power and hesitation. The engine uses all cylinders even when full power is not needed.
As a result, the engine will have to work harder, which will consume more fuel.
Additionally, the increased noise and vibration from AFM delete can strain your exhaust. It causes the engine to break down over time.
This deterioration may also spread to your vehicle’s engine over time, resulting in a loss of power and performance.
How To Fix Common Problems After AFM Delete
There are a few ways to fix common problems after AFM is deleted.
One way is to install an AFM delete kit. AFM delete kits come with the necessary hardware and software to disable AFM.
Another way is to have a professional AFM delete your car. This approach is more expensive, but it will ensure that the job is done correctly.
A third way is to install a tuner. Tuners can disable AFM without requiring any hardware changes.
It is the most accessible and convenient option, but it may not be legal in all states. Check your local laws before installing a tuner.
Whichever method you choose, make sure that you get the job done right to avoid further problems.
No Performance Increase After AFM Delete
It is important to note that AFM delete will not increase your car’s performance. It may decrease your car’s performance due to the increased strain on the engine.
AFM delete is only recommended if you have problems with your car and have exhausted all other options.
Check Engine Light Illuminated After AFM Delete
If your check engine light is illuminated after AFM delete, it is likely due to a faulty emission control system.
AFM delete can cause your car to emit more pollutants, which will trigger the check engine light. You should take your car to a mechanic to check it as soon as possible.
AFM delete is a risky modification that can cause more harm than good to your car.
If you proceed with AFM delete, ensure that you get the job done right to avoid further problems.
What Are The Risks Associated With AFM Delete?
AFM delete is a risky proposition because it can increase wear on engine components and reduce fuel economy. Additionally, AFM delete may void your car’s warranty.
Ensure you understand the risks before you decide to AFM delete your car.
How Much Does It Cost To Have AFM Delete Done?
The cost of AFM delete will vary depending on the method you choose.
AFM delete kits start at around $500, while professional AFM delete services can cost upwards of $1,000. Tuners that can disable AFM start at around $200.
Final Thoughts
AFM delete is a permanent change that can increase wear on engine components and reduce fuel economy.
AFM delete is only recommended if you have problems with your car and have exhausted all other options.
Ensure you understand the risks before you decide to AFM delete your car.
If you are experiencing any problems, we recommend taking your car to a mechanic or dealership as soon as possible.
AFM delete is a permanent change and cannot be reversed. Once AFM is deleted, you can’t turn it back on.
Kevin has been hanging around cars and automobile magazines since he knew what a car is. He grew up in his father’s 1995 Mercedes E320 Wagon and Volkwagon Phaeton W12 2004. He rides his first car, a manual 1979 Porche 911SC.
Currently, he owns an Acura Integra GS-R. During his childhood, he showed a keen interest in how things actually work and fix them. This passion transforms into his eternal love for cars and bestows him an ideal position in one of the leading automobile companies; whenever he finds time, he takes out his Acura and opts for the longest possible route to find hidden wholesome pleasure in a road trip.
Want to read some of the articles written by Kevin? Head to our blog section to find out all the articles written by Kevin.