Quick Navigation
Resetting malfunctions on your Toyota Pre-Collision system may be complicated at times.
That is why you need to have prior knowledge to reset malfunctions that may come up.
To make this process quite simple, we have highlighted some essential steps that will help you to restore your system to its initial state.
Kindly read this article to understand some of the necessary procedures that you should employ to reset your Toyota Pre-Collision system.
How To Reset Toyota Pre-Collision System
You can reset the Toyota pre-collision system in various ways, including the following:
Dissociate The Battery
If your pre-collision system is witnessing a minor problem, you do not have to worry. It’ll take you a little while to fix the issue.
Dissociate the battery for a short while. You can keep it disconnected for about five twinkles.
It’ll help clear all the minor glitches the system was having. It is a quick fix when your pre-collision system fails to function well.
Examine The Diagnostic Trouble Codes (DTCs) In The Pre-Collision System
DTCs help you descry, understand and break a problem as soon as possible.
Still, they will descry obstacles, and you don’t end up in an accident, especially when the cameras are dirty. Ensure you clean them to clear the view for your sensors.
However, you can wipe them with a clean cloth and continue your errands, If you’re in a rush.
It would be judicious to completely clean your Toyota to exclude the dust on your cameras.
Pre-collision system malfunction may also be a result of snow blockages. Clear the snow on the areas around your detectors for a better view.
In cases of sensors, drawing might not be a continuing result. They bear relief if they aren’t in good condition.
Avoid Driving In Adverse Lighting Conditions For Too Long
Intense sun or strong lighting conditions intrude on the detectors. They will lead to a Toyota pre-collision system malfunction.
Consequently, excess light might cause accidents. To avoid severe damage in an accident, you can try driving in a different direction.
Turn Off Voyage Control
Another way to reset the Toyota Pre-collisions system is by turning off the voyage control.
Voyage control keeps your Toyota at a regulated speed, automatically adding or dwindling with the business ahead.
If your pre-collision system is passing a malfunction, you might want to turn off the voyage control.
It has been an effective system that will help you before you fix the system.
Troubleshoot
Numerous systems require troubleshooting to serve rightly. Toyota’s pre-collision system isn’t different.
Check and troubleshoot the VSC and system DTCs to incontinently break the problem.
Troubleshooting this system brings it back in check to move on with your day’s business without worry.
Turn Safety Features Off
Do not forget that you can turn off the safety feature in your Toyota to fix the faulty pre-collision system.
Turning off the safety features is an effective way to help you with your system malfunctioning.
In this case, the system will reprogram and give you better results. Turning off your safety features helps you exclude all crimes if all other ways aren’t helpful.
Check For Defective Airbag Detector
An airbag detector’s position is at the front of your vehicle. However, it hinders your pre-collision system from performing if it isn’t in good condition.
Its work is to descry when an accident has passed and cover you from injuries. However, you should fix or replace it if it’s defective to serve its purpose.
Have An Examination For Any Form Of Malfunctioning
Getting an analysis is among the best ways to fix your pre-collision system malfunction on your Toyota.
Detecting the issues beforehand enough will be an added advantage for you.
For the examination and further backing, go to a Toyota dealer or your handyperson.
Examining your Toyota will help you fix malfunctions and protract the life of your pre-collision system.
Get Rid Of Rodents
Rodents similar to rats and mice are known for biting wires. However, you’ll probably witness a pre-collision system problem if they find their way into your Toyota.
Rodents mess up with the wiring of your Toyota, which leads to malfunctioning. You should buy rodent spray and spot your vehicle to deal with this.
In this case, you’ll chase down the rodents and fix your non-operating problem.
Conserving your Toyota car well can also be an effective way to get relieved of rodents.
Also, you need to do regular maintenance and service to ensure the rodents are gone.
Spotting them early enough will prevent them from messing up with the pre-collision system.
Avoid Tinted Windshield
Be sure to hinder windshields from excluding any malfunction. A pre-collision system requires a clear view of obstacles.
However, it might malfunction your entire system if the hinder windshield is too dark. We’d advise that you should avoid tinted windshields.
Fix The Pre-Collision System
A malfunction in your Toyota’s system might emanate from crimes in the system itself. In this case, to reset the system malfunction, call a technician to fix the system.
Radar detectors bear regular cleaning to help check on your Toyota pre-collision system. Clean it as frequently as possible to exclude all the dirt accumulated.
General Ways To Reset Your Toyota Pre-Collision System
Reset your Toyota pre-collision system in the following general ways:
- Check the fuse box to ensure it is intact
- Replace the fuse box (if it’s blown)
- Reconnect the battery
- If the problem persists, visit a handyperson or Toyota dealer for further backing.
Involve A Technician
For some problems with your Toyota pre-collision system, you might bear professional help.
Serious problems resulting from electrical issues call to require a technician to fix.
Also, once you troubleshoot this system and it does not respond, this is the ideal immediate response.
Spotting A Malfunction In Your Toyota Pre-Collision System
You can check several things to know whether there’s a malfunction in your Toyota Pre-collision system.
They save you from so much hassle, and once you realize the problem, resetting should be easy.
They include the following:
FWC Off Error
FWC error is generally a warning that a commodity isn’t right. This error might mean that your forward collision warning light system is turned off.
Red Lights
Red lights are another signal that the commodity isn’t correct. In this case, you should consider pulling over and having a check-up.
You can also follow the following simple way to exclude the malfunction of your Toyota:
- Turn the ignition switch off
- Stay for around five seconds or further
- Turn the ignition switch back on.
That should clear the alert, and if it fails, you should seek the help of a technician. Ignoring this warning might beget an accident, damage your auto, or hurt someone.
Final Thoughts
Maintaining the Toyota pre-collision system could be a difficult task at times. As the car owner, if you forget to keep your vehicle correctly, you will be required to reset it.
Many reasons cause malfunctions in your Toyota Vehicle, and these issues may lead to further damage if you fail to correct them on time.
You need to understand that everything should be under maximum control to avoid all sorts of accidents that may result from malfunctions.
James has been a car enthusiast since his childhood when he learned the differences between a ford and a chevy from his father. He loves to drive and restore old cars with a special drive for Italian marvels. Currently, he has a 1968 Alfa Romeo. He has studied aeronautics and civil aviation in his college and still gets smitten by Galant SS and Lancer GSR.
He is a New York-based product training director working with a giant automotive retailer. He loves to review and uncover the vehicles and their fascinating stories. He believes in keeping it legitimate with a keen passion for research on the latest technological upgrades in cars. While reading his articles or blogs, you can sense the extensive research and dedication backing the piece of text. He loves fried chicken, music, and spending quality time with his pet dog.