- Finding Kill Switch In Your Car
- How To Remove The Kill Switch In Your Car
- How To Install A Kill Switch In Your Car
Knowing that your vehicle has a life-saving knob that can keep it safe for you is a plus. Kill switches have helped curb a number of disasters.
On the other hand, nothing frustrates car thieves like having something kill their time like the kill switch in a car.
Finding Kill Switch In Your Car
Getting a mechanic to tell if your vehicle has a kill switch and their location would be a brilliant idea for cars.
But if you fancy doing stuff yourself, this guide will walk you through the process; read on and identify some hidden kill switches for vehicles.
Check Your Battery Switches
Your car battery is an excellent start to search for a kill switch knowing how a slight disconnect can affect a car moving.
So, if we are looking for a chance of a kill switch with the battery disconnect switches, then check your battery terminals for loose or strange wires. Yes, kill switches usually lurk around there, and you will find some.
Your Car’s Fuse Box Might Also House Some Kill Switches
A fuse box like you know it to be, lodging all the fuse and significant connections within the car might be a comfortable hiding spot for a kill switch.
So, quickly check your fuse box for stand-alone wires and pieces. If you spot even one, the chances are that it is a kill switch for your car’s security in the event of a theft.
Your Ignition Wire May Say Something
The spot where your car is woken to life may hold some kill switch; who knows? How convenient to have it stop a moving vehicle upon a theft situation.
Well, if we suspect the ignition wires, then you can look over at the ignition wires and sniff for additional cables, tiny pieces, or their likes.
Your Car Fuel-Line Might House Some Kill Switches
Your fuel line can hold a safety point and is likely to be under the car, right on the fuel line. To be sure, you will have to check under the fuel line for a pipe with a knob sticking out of it.
Your Car Remote Control Battery Switches Are Another Good Hiding Spot
Since manufacturers hide kill switches for the benefit of the car owner, it might find a rest spot inside the remote control.
Similarly, remote control battery switches operate like disconnect switches and can be easily turned off in the event of car theft.
To be sure of these, look over the battery terminals for some queer connections; you will spot them easily.
The next thing to do is find ways to remove kill switches from your car if you want to.
How To Remove The Kill Switch In Your Car
Seeing how annoying a kill switch can be when it suddenly trips off or the daily switching you might face, removing it might just be the best thing to do.
Since there are different types of kill switches in a car, the first thing to do is identify where they are located in your vehicle and find a way to remove them.
The Ignition Killer Switch
If your kill switch is in the ignition, you will have to read the car’s manual for instructions on installing the switch.
In addition, you will find instructions on disabling the switch from the manual, but you have to be discreet not to violate warranties.
Alternatively, you may get a car technician’s help here since the control is likely among the numerous circuits there, and if the button is not removed correctly and the wires refixed, the car might not start.
Check For Spliced Wires In The Battery Compartment
Ideally, Google should provide you with all the information you need to spot the number of the model. But if you can’t find the number and are keen on removing the kill switch yourself, here is what you should do.
Track the wires and cables from your battery device and look out for splices among the loom.
When you find splices that look a little cheap and stand-alone from the bunch, you will notice that the wire has been cut and spliced and is mostly identical.
With this discovery, you can carefully remove them and refix the device.
Disable The Steering Kill Switch
If you are sure that kill switches are hidden beneath your steering column, then you can visit there and pull out the ones you find.
Note that you are likely to find green, white, and red wires in some cars. Here is what you will do.
First, find an old phone cable, cut it and set it aside.
You can probably Google for the kill switch location of your brand of cars, or you look beneath the steering compartment and pull out the group of wires.
Find the green and red wires, cut them in the middle, and affix the old phone charger you earlier cut.
Tape it, so it glues firmly on both the green and red wires. When you do this, your car’s GPS gets disabled as well.
For other delicate kill switches, getting a mechanic or some skilled hands to help is still the best step.
If your car does not have a kill switch and you would like to install it, simple steps follow.
How To Install A Kill Switch In Your Car
The battery switch is one of the most straightforward kill switches to install.
First, you need to unscrew the negative cable connected to your battery, then move the cutoff switch to the negative battery terminal. Take care to tighten it.
After that, affix the negative battery cable to the battery disconnect switch, ensuring a firm screw to it. This battery disconnect switch comes with a lever or a key and requires turning on and off.
Ignition Kill Switch
All you need to do here is add a button to the wire or cables in your car’s ignition switch.
Using your car’s wiring diagram, ensure that your vehicle is parked on the leveled ground and that the disconnected wires do not touch the ground.
Please search for the ignition wire, cut it and tape or solder it to the kill switch, and you are good.
Remote-Controlled Battery Switch
All you need to get is an electromagnetic solenoid valve terminal kill system and fix it in your car in a few minutes.
There is no hood opening, no multiple wiretapping; get the kit and install your kill switch in a snap.
Having a kill switch is an additional level of security to your car against car theft or burglary. However, this kill switch can act up and pose problems for your car.
Sometimes, they go off in motion because you forgot to engage them or might have some other annoying issue.
All of these downsides and more make knowing where the kill switches of your car are essential, as well as knowing how to remove and install them when necessary.
With comprehensive experience in writing exceptional quality articles and blogs about cars and related stuff, Daniel is one of the finest bloggers and a hardcore car lover we have. He is an ASE certified technician with an across-the-board experience of 10 years in the industry. He could not help tinkering with anything he got his hands on from a young age, which led to his remarkable career in the automotive repair industry.
When he is not under any hood, you can find him on the water or in the woods to pursue his passion for hunting and fishing. He has been writing for multiple sectors and is a regular contributor to several publications.
He currently owns a Nissan 300ZX TT and a Pearl Yellow but plans to upgrade it to 550 HP. His favorites include the Koenigsegg CCX and Lamborghini Diablo 6.0 VT, but for him, the Ferrari 360 Spider is one of the sexiest cars that exists to date.
Being an avid world traveler, he has spent most of his time analyzing the automotive markets, latest technology, and local favorites to enhance his knowledge base. He is currently living in North Caroline, where it’s all about food and coffee and, of course, cars.