Quick Navigation
There have been many cases of the Audi drivers complaining about the Audi side assist system fault.
Interestingly, the drivers do not quite understand the source of the problem. They find themselves stuck, and they cannot get the solution at that moment.
The problem sometimes chirps when you press the side assist system fault! You may not be able to see any glow on the side assist button.
Is this part of the challenges you are encountering with your Audi?
The article will take you through the insights concerning the possible causes and solutions you can quickly get.
What Causes An Audi Side Assist System Fault?
So, because many quizzes are running in the drivers’ minds, it is necessary to set some things straight about the Audi side assist system fault.
We also elaborate on the possible reasons that may trigger the Side system fault to pop up in the Audi.
Frequent Stops And Accelerations
First, you should notice that the Audi side assists system fault is self-restoring!
You will see the popup in most cases, but it will work if you leave your car for some hours or days and restart it.
You will experience the problem, especially when you are forced to stop and move at varying speeds. It may not look suitable for the driver because it makes you wonder.
While many drivers will assume that it was just a tiny error, some perfectionists will want to seek the help of the Audi technicians.
It is a good move, but you should be ready to pay the price.
Accidentally Hitting The Side Assist System
If you hit the side system button by accident, you may see a popup notice telling you that the SA is not on!
Note that we are always focused on the steering wheel when driving.
In this instance, we may accidentally touch some essential parts of the car, including the Audi side system button.
Fortunately, most drivers will safely drive home even when the error popup is active.
You may not even notice it, but you will be doing well if you make an effort to diagnose the problem.
But it will always be helpful to seek the Audi tech Help if such errors persist.
Audi Assist System Not Up To Date
In some cases, you will experience the Audi side system fault when the system is not updated.
Many indications will guide you to realize that you are dealing with a system update issue.
First, the backup sensors will act up normally, and you begin having the solid tones that make you believe that something is right behind you.
The false signals are troublesome, and you should be worried.
Updating The ECU firmware
You may experience an Audi system side fault when updating the ECU firmware. You will notice a slight change in the everyday operations of your Audi.
While the update can make things look good in the MMI, you may lose the flashing lights on the side mirrors.
As an Audi owner, you will find this a problem because not everyone will be happy with just everyday work.
After all, the beauty of flashing lights in Audi makes it among the best-selling cars! An update may solve a side system fault popup error.
Note that this practice can interfere with flashlights, which sums up the SA error.
Faulty Sensors
In another instance, a fault in one of the sensors could result in an Audi side system fault popping up.
It is yet another complex problem that most drivers will wait for their Audi to reset itself, but what if it persists and you don’t get the feedback you expect when you turn on your car?
Luckily, we have compiled some solutions for you.
Solutions To A Side System Fault In Audi
When you experience the side system faults in your Audi, you will have options.
You either do it yourself if you know the basics for diagnosing the faulty parts, or you can take your car to the Audi technicians who will do the whole job for you at a fee.
If you are still in the warranty timelines, you will be lucky because you will only have to take your car to your local Audi Dealers.
The first step to a solution is to do a system update.
It could be best to seek technical assistance here, knowing that improper updates can add more problems to Your Audi.
Secondly, a technician can help you calibrate the side system, and if all that else won’t solve the issue, then maybe it’s time to replace some sensors and parts that may have worn out over time.
Steps for replacing worn-out sensors and dysfunctional side system parts:
- Visit the Audi service center and pay a fee that won’t exceed $800. Such a fee is sufficient to gather for the service, but some expert drivers will want to do it themselves, and of course, you will save a lot.
- If you are doing it yourself, begin by checking the central locking pump. In most cases, the hoses may come off, and you should first ensure that they are in place. The primary locking pumps lie at the right-hand corner of your boot. Start by removing the carpet and the internal trim to enable you to find the block of sponge. Lift it to lace the pump which sits inside it.
- If the hoses are intact, you can proceed to the internal compressor wheel and check if it is shattered. If you find issues, you should open the pump and replace the wheel. You can buy a complete pump and return it as a whole to be sure that you are providing a lasting solution. Note that every Audi car has a specific pump, and you should buy the one with the exact specifications. You need to check the serial numbers to ensure that you get the perfect replacement for the pump and compressors.
Note that it may get confusing when you do this alone for the first time.
Therefore, it is necessary to take photos in every step so that you won’t mess it up when returning them to their original positions.
Note that the pumps and other replaceable sensors are not very expensive.
You can always trust your technician on this, provided that you are dealing with reputable dealers that can do an excellent job in your car.
If your Audi still has a valid warrant, it will be even better to rush to your local dealer to help you diagnose and repair anything that may not be functioning well in your Audi car.
Conclusion
Audi side assist system fault is a common problem that drivers often report.
The cause may be minor or complex, and you should always be aware of what you should expect.
You also need to know the possible causes of the side system assist error and the possible remedies available.
Note that mistakes are always scheduled in anything that uses software, and therefore, it should not worry you so much as long as it won’t compromise your travels.
Kevin has been hanging around cars and automobile magazines since he knew what a car is. He grew up in his father’s 1995 Mercedes E320 Wagon and Volkwagon Phaeton W12 2004. He rides his first car, a manual 1979 Porche 911SC.
Currently, he owns an Acura Integra GS-R. During his childhood, he showed a keen interest in how things actually work and fix them. This passion transforms into his eternal love for cars and bestows him an ideal position in one of the leading automobile companies; whenever he finds time, he takes out his Acura and opts for the longest possible route to find hidden wholesome pleasure in a road trip.
Want to read some of the articles written by Kevin? Head to our blog section to find out all the articles written by Kevin.