How To Remove Center Console – Complete Guide

How To Remove Center Console – Complete Guide

Some car enthusiasts argue that removing the center console from a vehicle can improve its performance.

They claim that by getting rid of this unnecessary weight, the car will be able to accelerate and brake more quickly.

How to Remove Center Console in Car

Additionally, they say that removing the console can also help improve fuel economy.

It is undoubtedly true that removing the console can save weight and potentially improve a car’s performance.

However, whether or not these benefits are enough to justify the removal of such a vital part of the car is up to each individual to decide.

What Is The Center Console Of The Car?

The car’s center console refers to the area in a vehicle where the driver and passengers can control various features.

It is typically located in the middle of the dashboard, in front of the steering wheel.

The center console may contain a variety of controls for things like the climate control system, infotainment system, and other functions.

It is an integral part of the car that allows drivers and passengers to stay comfortable and entertained while on the road.

Impact Of Center Console On Efficient Driving

While a center console can provide many benefits to a driver, it can also harm driving efficiency.

One of the biggest problems with a center console is that it can block the driver’s view of the road.

It can make it difficult for the driver to see potential hazards in time to avoid them.

Additionally, a central console can make it difficult for the driver to reach the controls they need while driving.

It can lead to frustration and may even cause accidents. Finally, a central console can be a significant source of distraction for a driver.

If the console is not used correctly, it can take the driver’s attention away from the road and increase the chance of an accident.

Steps To Remove Center Console From The Car

The central console is responsible for various functions, from controlling the radio to climate control. In some cases, it may also house the navigation system.

As such, it’s an essential part of your car’s interior.

However, there are times when you may need to remove the central console.

For example, maybe you’re doing some upgrades and need to access the wiring, or perhaps you’re troubleshooting an issue with one of the systems controlled by the console.

Disconnecting The Negative Battery

Before you begin, disconnecting the negative battery terminal is essential to avoid any electrical shorts.

If you need to remove your car’s central console, disconnecting the negative battery terminal is one of the easiest ways.

It will disable the console and allow you to remove it without any issues.

Remember that you’ll need to reconnect the battery terminal before you wish to use a central console again.

When removing the central console, it is essential to remember to disconnect the negative terminal. Failure to do so can result in damage to the electrical system.

The negative terminal provides power to various systems in the car, including the ignition system and engine control unit.

If this power is not disconnected, it can cause shorts and other damage.

Using A Trim Tool

Using a trim tool, pry off the center console trim panel to expose the screws holding the console in place. Once you have your trim tool kit, the process is relatively simple.

First, locate the screws that hold the console in place.

There are usually four of them, usually located under the console lid. Use your trim tool to remove these screws.

With the screws removed, you should be able to pry the console out gently. Start at one end and work your way around until the console is accessible.

Guide On Removing Center Console in Car

Removing the central console from a car without using a trim tool can significantly impact the vehicle’s appearance.

If the console is not released correctly, it can cause damage to the dashboard and other surfaces in the car.

It can lead to an expensive repair bill and a less-than-perfect appearance for your vehicle.

Removing The Screws

Remove the screws and lift the console out of the car.

If you need to uninstall the central console of your car, you will first need to remove any screws that are holding it in place.

Once the screws are removed, you should be able to lift the console off of the dashboard.

If any wires are still attached to the console, disconnect them before completely removing the console.

Removing the central console from a car can be difficult, but removing all of the screws is crucial to avoid any damage.

Unfortunately, some people may not realize that there are screws hidden under the trim, and they may end up causing damage by trying to pry it open without removing the screws.

Disconnecting Electrical Connections

Disconnect any electrical connections to the console, including the cigarette lighter and power outlet.

It will ensure that the console is completely disconnected and won’t be able to power on.

When disconnecting the electrical connections, it is crucial to take your time and be careful not to damage any connectors.

Several connectors need to be disconnected, and each one is important. If you are not sure how to disconnect a particular connector, consult your vehicle’s service manual.

Pry Off The Tabs

Pry off the console with a plastic trim piece around the gear shift area. First, locate the two plastic tabs on either side of the console.

Next, use a flathead screwdriver to pry up on the tab nearest you.

Once that tab is released, move to the other side and repeat the process. With both tabs released, the console should quickly come off.

If it is stubborn, you can try wiggling it back and forth until it comes loose.

One of the main dangers of prying off the tabs is that you can damage the console itself.

If you apply too much pressure, you can easily snap off one of the tabs or even crack the plastic. It can make it difficult to reattach the console, which may look damaged.

Remove Gear Shift Boot

Remove the two screws holding the gear shift boot and pull it out of the car. It will give you access to the bolts that hold the console in place.

Pull it up and out of the way to remove the boot. Then, use a socket wrench to remove the console’s bolts.

Once the bolts are removed, try pulling the console gently out and away from the vehicle.

Unscrew The Console From Its Place

Unscrew the bolts holding the central console and remove them from the car. Then, you can remove it from the location where it is installed.

It can be done by using the console from the location if your car is a manual transmission.

An automatic transmission car does not require that much effort, nor does it allow the owner to remove the console from the place.

Alternatively, you can also use a third-party uninstaller tool to remove the center console from your computer.


In a nutshell, the central console provides several benefits for your car, and it can also be a significant reason for you to lose control of the car.

Therefore, you must know how to remove the central console to drive more effectively.

The steps mentioned in this blog post will help you do that without any assistance.

So do give it a try if your central console is the primary reason for the causes mentioned above that are more likely to arise in your car.