There is a general misconception about car bumpers. One is that it reduces the impact of an accident on the car and the driver during a crash. The fact is, the bumper is not a safety feature of a vehicle.
The bumper serves as a guard to diminish or forestall physical harm to the vehicle’s front and back in low-speed crashes. The bumper intends to secure the hood, trunk, exhaust, fuel, fumes, and cooling framework. The bumper is a guard made of steel, aluminum, rubber, or plastic.
The bumper also adds to the car’s aesthetics. It becomes very noticeable if there is a scratch, dent, or any form of imperfection on it. However, these imperfections can not be a reason to worry because they can be fixed by repainting.
Here’s how to get your bumper ready for painting.
Tools Required To Prepare Your Bumper For Painting
A Clean And Dry Cloth/Towel
The towel or dry cloth will come in handy for drying the bumper’s surface after the body filler exercise. Cleaning and keeping the bumper dry helps to reveal the actual state of the job in progress.
The sandpaper serves to eliminate material from surfaces. Either to make them smoother, to remove a layer of the body (for example, old paint) or, in this case, to make the surface harsher, for instance, as groundwork for sticking.
The recommendation for preparing the bumper will be the 500 grit size sandpaper.
Abrasive Pad (scotch-brite)
This tool is what you use to smoothen and polish the bumper part where you worked.
Use a marker to note the part of the bumper that might need special attention. It will help you work faster and accurately.
This is a simple cleaning liquid applied to surfaces before wiping with a dry cloth. It helps to clean the surface of dust and all other invisible particles.
Now that you have your tools ready, it’s time to get your bumper prepared for painting. Here are some processes of achieving this.
A lot of the material you will be using to get your bumper ready for painting contains harmful chemicals dangerous to humans. So it is crucial to adopt safety best practices like the use of respirators, protective hand gloves, and spectacles to protect the eyes.
Highlighting and applying standard safety measures are essential in the process of working on your bumper.
Check Bumper For Imperfections
Start by detaching the bumper from the rest of the car and check all the areas that require attention. Use a marker to circle all the areas that need body fillers. Wash all the marked areas before the process of applying the sandpaper.
Then follow by sanding all affected areas on the primer with a 500 grit sandpaper. Follow up by applying fillers to cover holes and dents.
Wash and allow it to dry. It will be an ideal opportunity for sanding again. While you’re filing the marked areas, it’s a best practice to ensure you stop and check your progress frequently.
The process of covering imperfection on your bumper using body filler requires experience and professionalism. We recommend taking your car to an auto technician to get the job done for better results.
Use The Sandpaper And Abrasive Pad
Use your abrasive pad to get the grime out of the surface. To achieve smooth and polished surfaces, use the abrasive pads to sand the fender all over. Check all the spots and make sure you don’t miss any marked areas.
If you discover rough edges or missed spots, apply the sandpaper again. This process of sanding and smoothening will continue until you get a perfect surface.
Scratches can genuinely limit your ability to shine and make a lovely vehicle look unattractive. Interestingly, these scratches can quickly appear in the car from our daily use.
Achieving a smooth surface requires patience and continuous checking to ensure every spot is covered.
Remove Dust From The Surface
The first exercise you have to do is use a dry cloth or towel to clean the bumper properly. Follow up by using a surface cleaner and a new clean cloth to tidy up the bumper.
You can either spray the surface cleaner on the bumper then apply the towel to clean dry or spread the liquid on the towel before wiping.
Also, use a clean cloth or dry towel to remove dust and residues on the bumper’s surface. Wipe the bumper clean and get it ready for the next process before the actual painting. If the bumper’s body is not rid of residues before the painting, the final output will come out poor and untidy.
Left behind or missed dust can alter good bumper work’s perfection, leading to peeling soon after the painting.
Mask Off Other Areas
If you want to protect some areas from paint, cover them with clean paper. This will prevent the color from spreading to unwanted parts on the bumper. Also, be sure to carry out the painting carefully before the bumper is attached to the car.
Suppose you attempt to install the bumper before painting. In that case, it will require preventing the rest of the body from paint.
Before repainting your bumper, it’s essential to cover and mask off other areas that do not need painting. This practice will prevent smears and poorly done jobs.
Also remember, except you are a professional auto technician, the best place to get a professional bumper painting is at the auto workshop.
Kevin has been hanging around cars and automobile magazines since he knew what a car is. He grew up in his father’s 1995 Mercedes E320 Wagon and Volkwagon Phaeton W12 2004. He rides his first car, a manual 1979 Porche 911SC.
Currently, he owns an Acura Integra GS-R. During his childhood, he showed a keen interest in how things actually work and fix them. This passion transforms into his eternal love for cars and bestows him an ideal position in one of the leading automobile companies; whenever he finds time, he takes out his Acura and opts for the longest possible route to find hidden wholesome pleasure in a road trip.
Want to read some of the articles written by Kevin? Head to our blog section to find out all the articles written by Kevin.